DTC P2006 Intake Manifold Runner Control Stuck Closed (Bank 1): DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Immediately at fault recognition
GENERAL DESCRIPTION Refer to GD(H4DOTC)-204, DTC P2006 INTAKE MANIFOLD RUNNER CONTROL STUCK CLOSED (BANK 1), Diagnostic Trouble Code (DTC) Detecting Criteria.
CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Refer to , OPERATION , Clear Memory Mode., and Inspection Mode Refer to , PROCEDURE , Inspection Mode..

Step	Check	Yes	No
1 CHECK FOR ANY OTHER DTC ON DISPLAY.	Is any other DTC displayed?	Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Refer to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .	Go to step 2 .
2 CHECK TUMBLE GENERATOR VALVE RH. Remove the tumble generator valve assembly RH. Check the tumble generator valve body.	Is there any dirt or clogging with foreign objects in the tumble generator valve?	Clean the tumble generator valve.	Replace the tumble generator valve assembly RH. Refer to FU(H4DOTC)-47, Tumble Generator Valve Assembly.