DTC P0244 Turbo/Super Charger WASTEGATE Solenoid "A" Range/Performance: Trouble Symptom
WARNING: This page is about a different variant/trim than selected.
Poor driving performance
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Refer to
, OPERATION , Clear Memory Mode., and Inspection Mode Refer to
, PROCEDURE , Inspection Mode..
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Refer to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . | Go to step 2 . |
| 2 CHECK WASTEGATE ACTUATOR PIPING AND WASTEGATE CONTROL SOLENOID VALVE PIPING. | Are there any damage or disconnection of hose in wastegate actuator piping or wastegate control solenoid valve piping? | Connect the wastegate actuator pipe or wastegate control solenoid valve pipe properly. If defective, replace the hose. | Replace the wastegate control solenoid valve. Refer to WASTEGATE CONTROL SOLENOID VALVE Wastegate Control Solenoid Valve. |