LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (H4DOTC)) >> V-belt >> Removal >> V-Belt TENSIONER Assembly And Idler Pulley

V-Belt TENSIONER Assembly And Idler Pulley

WARNING: This page is about a different variant/trim than selected.
  1. Remove the V-belts. Refer to , V-BELT , REMOVAL, V-belt.
  2. Remove the bolt securing the V-belt tensioner assembly to the power steering pump bracket, and remove the V-belt tensioner assembly.
    Fig 1: Locating Idler Pulley Bolt
    G06650696Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolt securing the idler pulley to the A/C compressor bracket, and remove the idler pulley.
    Fig 2: Identifying V-Belt And Pulleys
    G06650697Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals