V-Belt TENSIONER Assembly And Idler Pulley

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

Tightening torque:

33 N.m (3.4 kgf-m, 24.3 ft-lb)

Fig 1: Locating Bolt Securing V-Belt Tensioner Assembly

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

20 N.m (2.0 kgf-m, 14.8 ft-lb)

Fig 2: Identifying V-Belt Tension Indicator (A)

Courtesy of SUBARU OF AMERICA, INC.