LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (H4DOTC)) >> V-belt >> Inspection

Section 6 (Engine Mechanical (H4DOTC)): V-belt: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check the V-belt for cracks, tear or wear.
  2. Remove the air intake duct. Refer to AIR INTAKE DUCT .
  3. Check that the V-belt tensioner assembly and idler pulley do not have deformation, cracks or other damages.
  4. Check the V-belt tension indicator (A) shows within the limit (B).
    Fig 1: Removing Crank Pulley Bolt
    G06650701Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals