Special Tool

WARNING: This page is about a different variant/trim than selected.

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	498267600	CYLINDER HEAD TABLE	Used for replacing valve guides. Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	498457000	ENGINE STAND ADAPTER RH	Used together with ENGINE STAND (499817100).
Courtesy of SUBARU OF AMERICA, INC.	498457100	ENGINE STAND ADAPTER LH	Used together with ENGINE STAND (499817100).
Courtesy of SUBARU OF AMERICA, INC.	498747300	PISTON GUIDE	Used for installing the piston into the cylinder.
Courtesy of SUBARU OF AMERICA, INC.	498857100	VALVE OIL SEAL GUIDE	Used for press-fitting of intake and exhaust valve guide oil seals.
Courtesy of SUBARU OF AMERICA, INC.	499017100	PISTON PIN GUIDE	Used for installing piston pin, piston and connecting rod.
Courtesy of SUBARU OF AMERICA, INC.	499037100	CONNECTING ROD BUSHING REMOVER AND INSTALLER	Used for removing and installing connecting rod bushing.
Courtesy of SUBARU OF AMERICA, INC.	499587100	OIL SEAL INSTALLER	Used for installing oil pump oil seal.
Courtesy of SUBARU OF AMERICA, INC.	499587200	CRANKSHAFT OIL SEAL INSTALLER	Used for installing crankshaft oil seal. Used together with CRANKSHAFT OIL SEAL GUIDE (499597100).
Courtesy of SUBARU OF AMERICA, INC.	499587600	OIL SEAL INSTALLER	Used for installing the camshaft oil seal.
Courtesy of SUBARU OF AMERICA, INC.	499597100	CRANKSHAFT OIL SEAL GUIDE	Used for installing crankshaft oil seal. Used together with CRANKSHAFT OIL SEAL INSTALLER (499587200).
Courtesy of SUBARU OF AMERICA, INC.	499597200	OIL SEAL GUIDE	Used for installing the camshaft oil seal. Used together with OIL SEAL INSTALLER (499587600).
Courtesy of SUBARU OF AMERICA, INC.	499718000	VALVE SPRING REMOVER	Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	499767200	VALVE GUIDE REMOVER	Used for removing valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499767400	VALVE GUIDE REAMER	Used for reaming valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499817100	ENGINE STAND	Used for disassembling and assembling engine. Used together with ENGINE STAND ADAPTER RH (498457000) & LH (498457100).
Courtesy of SUBARU OF AMERICA, INC.	499977100	CRANK PULLEY WRENCH	Used for removing and installing the crank pulley.
Courtesy of SUBARU OF AMERICA, INC.	499977500	CAM SPROCKET WRENCH	Used for removing and installing intake cam sprocket and exhaust cam sprocket.
Courtesy of SUBARU OF AMERICA, INC.	499987500	CRANKSHAFT SOCKET	Used for rotating crankshaft.
Courtesy of SUBARU OF AMERICA, INC.	18251AA020	VALVE GUIDE ADJUSTER	Used for installing intake and exhaust valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499097700	PISTON PIN REMOVER ASSY	Used for removing piston pin.
Courtesy of SUBARU OF AMERICA, INC.	18353AA000	CLAMP PLIERS	Used for removing and installing the PCV hose. This tool is made by the French company CAILLAU. (code) 54.0.000.205 To make it easier to obtain, it has been provided with a tool number.
Courtesy of SUBARU OF AMERICA, INC.	18371AA000	CONNECTOR REMOVER	Used for disconnecting the quick connector on the fuel return hose side of the engine compartment (intake manifold).
Courtesy of SUBARU OF AMERICA, INC.	18854AA000	ANGLE GAUGE	Used for installing the crank pulley.
Courtesy of SUBARU OF AMERICA, INC.	42099AE000	QUICK CONNECTOR RELEASE	Used for disconnecting quick connector of the engine compartment.
Courtesy of SUBARU OF AMERICA, INC.	1B022XU0	SUBARU SELECT MONITOR III KIT	Used for various inspections.