Engine Mounting: Assembly

1. Install the front cushion rubber to the front mounting bracket.

   Tightening torque: 

   45 N.m (4.6 kgf-m, 33.2 ft-lb) 

   Fig 1: Locating Engine Mounting Bracket Bolts

   Courtesy of SUBARU OF AMERICA, INC.
2. Install the front cushion rubber to the engine mounting bracket.

   Tightening torque: 

   25 N.m (2.5 kgf-m, 18.4 ft-lb) 

   Fig 2: Locating Turbocharger Upper Stay Bolts

   Courtesy of SUBARU OF AMERICA, INC.
3. Install the turbocharger upper stay to the engine mounting bracket.

Tightening torque: 

33 N.m (3.4 kgf-m, 24.3 ft-lb) 

Fig 3: Attaching ST To Engine After Removing Engine From Vehicle Body

Courtesy of SUBARU OF AMERICA, INC.