Valve Spring
WARNING: This page is about a different variant/trim than selected.
- Check the valve springs for damage, free length, and tension. Replace the valve spring if it is not within the standard value presented in the table.
- To measure the squareness of the valve spring, stand the valve spring on a surface plate and measure its deflection at the top of valve spring using a right angle gauge.
| Free length | mm (in) | 47.32 (1.863) |
| Tension/spring height N (kgf, lbf)/mm (in) | Set | 205 - 235 (20.90 - 23.96, 46.09 - 52.84)/36.0 (1.417) |
| Lift | 426 - 490 (43.44 - 49.96, 95.78 - 110.17)/26.5 (1.043) | |
| Squareness | 2.5°, 2.1 mm (0.083 in) or less | |