Section 5 (Engine Intake Induction (H4DOTC)): Turbocharger: Disassembly

1. Remove the oil inlet pipe from the turbocharger.
   Fig 1: Locating Oil Inlet Pipe Clamping Bolts

   Courtesy of SUBARU OF AMERICA, INC.
2. Remove the water pipe from the turbocharger.
   Fig 2: Locating Turbocharger Water Pipe Clamping Bolts

   Courtesy of SUBARU OF AMERICA, INC.
3. Remove the water pipe connector from the turbocharger.
   Fig 3: Locating Turbocharger Water Pipe Connector

   Courtesy of SUBARU OF AMERICA, INC.
4. Remove the exhaust cover from the turbocharger.
   Fig 4: Locating Turbocharger Exhaust Cover Mounting Bolt

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the exhaust stay from the turbocharger.

Fig 5: Locating Turbocharger Exhaust Stay Mounting Bolt

Courtesy of SUBARU OF AMERICA, INC.