LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Exhaust System (H4DOTC)) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the center exhaust pipe (rear) from the rear exhaust pipe.
    Fig 1: Locating Center Exhaust Pipe (Rear) Clamping Bolts
    G06649529Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the muffler from rear exhaust pipe.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    Fig 2: Locating Rear Exhaust Pipe Muffler Clamping Bolts
    G06649578Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
CAUTION: Be careful not to let the muffler contact the rear bumper.
Fig 3: Locating Rear Exhaust Pipe Cushion Rubber
G06649579Courtesy of SUBARU OF AMERICA, INC.