PCV Valve: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the collector cover.
Remove the intercooler. Refer to INTERCOOLER .
Disconnect the vacuum hose (A) and vacuum hose (B) from the PCV valve and remove the PCV valve.
NOTE: Pinch the clamp of the vacuum hose (B) by fitting the cut out in the ST with the protrusion on the clamp as shown in the figure, and unlock the clamp.

ST 18353AA000 CLAMP PLIERS

Fig 1: Identifying Clamp Of PCV Hose Assembly With ST (View 3 Of 4)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Identifying Vacuum Hose (View 1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.