PCV Valve: Installation

WARNING: This page is about a different variant/trim than selected.

Connect the vacuum hose (A) and vacuum hose (B) to the PCV valve.
NOTE: Use a new clamp for the vacuum hose (B), fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.

ST 18353AA000 CLAMP PLIERS

Fig 1: Identifying Clamp Of PCV Hose Assembly With ST (View 4 Of 4)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Identifying Vacuum Hose (View 2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. Refer to INTERCOOLER .
Install the collector cover.