Fuel Temperature Sensor: Inspection
WARNING: This page is about a different variant/trim than selected.
- Check that the fuel temperature sensor has no deformation, cracks or other damages.
- Check the resistance between the fuel temperature sensor terminals.
CAUTION:
When measuring the resistance, check the circuit tester specification and be careful not to turn on electricity 3 V or more to prevent damaging the fuel temperature sensor.
| Temperature | Terminal No. | Standard |
|---|---|---|
| -10°C (14°F) | 2 and 3 | 9.2±2.2 kΩ (when the measured current is 0.5 mA) |
| 20°C (68°F) | 2.5±0.2 kΩ (when the measured current is 1.0 mA) | |
| 50°C (122°F) | 0.84+0.06-0.05 kΩ (when the measured current is 1.0 mA) |