Fuel Tank Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

WARNING: Place "NO OPEN FLAMES" signs near the working area.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Lift up the vehicle.
Disconnect connector (A) from fuel tank pressure sensor.
Pull out the vacuum hose (B) from vehicle.
Remove the fuel tank pressure sensor from the bracket.

Fig 2: Identifying Fuel Tank Pressure Sensor Connector And Vacuum Hose (View 1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the pressure hose from fuel tank pressure sensor and remove the fuel tank pressure sensor.

Fig 3: Locating Pressure Hose

Courtesy of SUBARU OF AMERICA, INC.