Release Bearing

WARNING: This page is about a different variant/trim than selected.

CAUTION: Because this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or solvents when servicing the clutch.

Check the bearing for smooth movement by applying force to the bearing in the radial direction.
Radial direction stroke:

1.6 mm (0.063 in)
- Non-turbo model
  
  Fig 1: Checking Bearing - Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
Fig 2: Checking Bearing - Turbo Model
Courtesy of SUBARU OF AMERICA, INC.
While applying force to the bearing in the rotational direction, check the bearing for smooth rotation.
- Non-turbo model
  
  Fig 3: Checking Bearing For Smooth Rotation - Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
Fig 4: Checking Bearing For Smooth Rotation - Turbo Model
Courtesy of SUBARU OF AMERICA, INC.
Check for wear or damage at the bearing case surface in contact with the lever.