Back-Up Light Switch & Neutral Position Switch

WARNING: This page is about a different variant/trim than selected.

Install the back-up light switch & neutral position switch with the harness.
Tightening torque:

32.3 N.m (3.3 kgf-m, 23.8 ft-lb)

Fig 1: Identifying Back-Up Light Switch And Neutral Position Switch
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Connect the connectors of back-up light switch & neutral position switch.
Install the air intake boot assembly. (non-turbo model) Refer to AIR INTAKE BOOT .
Install the intercooler. (turbo model) Refer to INTERCOOLER .
Install the collector cover. (turbo model)
Connect the battery ground terminal.