LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Manual Transmission And Differential) >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission assembly from the vehicle. Refer to Manual Transmission Assembly  .
  2. Remove the transfer case together with the extension case assembly. Refer to Transfer Case and Extension Case Assembly  .
  3. Remove the transmission case. Refer to Transmission Case  .
  4. Remove the drive pinion shaft assembly.
    NOTE: Use a hammer handle, etc. to remove if too tight.
    Fig 1: Removing Drive Pinion Shaft Assembly
    G07915181Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals