LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection Fuel Systems (H4DOTC)) >> Camshaft Position Sensor >> Removal >> Intake Side >> Camshaft position sensor LH

Camshaft position sensor LH

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07910746Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the intake manifold. Refer to , REMOVAL , Intake Manifold.
  3. Remove the camshaft position sensor LH.
    Fig 2: Locating LH Camshaft Position Sensor
    G05954812Courtesy of SUBARU OF AMERICA, INC.