Special Tool

WARNING: This page is about a different variant/trim than selected.

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	18250AA010	CYLINDER HEAD TABLE	Used for replacing valve guides. Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	18232AA000	ENGINE STAND	Used for disassembling and assembling engine.
Courtesy of SUBARU OF AMERICA, INC.	498497100	CRANKSHAFT STOPPER	Used for stopping rotation of drive plate when removing/tightening crank pulley bolt.
Courtesy of SUBARU OF AMERICA, INC.	398744300	PISTON GUIDE	Used for installing piston in cylinder.
Courtesy of SUBARU OF AMERICA, INC.	18261AA010	VALVE OIL SEAL GUIDE	Used for press-fitting of intake and exhaust valve guide oil seals.
Courtesy of SUBARU OF AMERICA, INC.	18350AA000	CONNECTING ROD BUSHING REMOVER AND INSTALLER	Used for removing and installing connecting rod bushing.
Courtesy of SUBARU OF AMERICA, INC.	499977500	CAM SPROCKET WRENCH	Used for removing and installing cam sprocket.
Courtesy of SUBARU OF AMERICA, INC.	499587200	CRANKSHAFT OIL SEAL INSTALLER	Used for installing crankshaft oil seal. Used together with CRANKSHAFT OIL SEAL GUIDE (499597100).
Courtesy of SUBARU OF AMERICA, INC.	499597100	CRANKSHAFT OIL SEAL GUIDE	Used for installing crankshaft oil seal. Used together with CRANKSHAFT OIL SEAL INSTALLER (499587200).
Courtesy of SUBARU OF AMERICA, INC.	499718000	VALVE SPRING REMOVER	Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	499765700	VALVE GUIDE REMOVER	Used for removing valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499765900	VALVE GUIDE REAMER	Used for reaming valve guides.
Courtesy of SUBARU OF AMERICA, INC.	18252AA000	CRANKSHAFT SOCKET	Used for rotating crankshaft.
Courtesy of SUBARU OF AMERICA, INC.	1B022XU0	SUBARU SELECT MONITOR III KIT	Used for troubleshooting the electrical system.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for installing automatic transmission assembly to engine.
Courtesy of SUBARU OF AMERICA, INC.	499585700	OIL SEAL GUIDE	Used for installing the chain cover oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18251AA050	VALVE GUIDE ADJUSTER	Used for installing valve guides on intake side.
Courtesy of SUBARU OF AMERICA, INC.	18251AA060	VALVE GUIDE ADJUSTER	Used for installing valve guides on exhaust side.
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for stopping rotation of crank pulley when removing and installing crank pulley bolt. Used for stopping rotation of idler sprocket when removing and installing idler sprocket bolt. Used together with PULLEY WRENCH PIN SET (18334AA000).
Courtesy of SUBARU OF AMERICA, INC.	18334AA000	PULLEY WRENCH PIN SET	Used for stopping rotation of crank pulley when removing and installing crank pulley bolt. Used for stopping rotation of idler sprocket when removing and installing idler sprocket bolt. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18332AA020	OIL FILTER WRENCH	Used for removing and installing oil filter.
Courtesy of SUBARU OF AMERICA, INC.	42099AE000	QUICK CONNECTOR RELEASE	Used for disconnecting quick connector of the engine compartment.
Courtesy of SUBARU OF AMERICA, INC.	18360AA020	HANGER	Used for hanging the engine.