LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Aux. Emission Control Devices (H6DO)) >> PCV Valve >> Removal

PCV Valve: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
    NOTE: Follow the steps below when removing the collector cover.
    1. Pull up the two points at the rear (A).
    2. Pull up the two points at the front (B) while moving them forward.
      Fig 1: Removing Collector Cover
      G06651504Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the battery and battery carrier. Refer to BATTERY .
  3. Disconnect the PCV hose.
    Fig 2: Identifying PCV Hose
    G07912515Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the PCV valve from rocker cover.
    Fig 3: Identifying PCV Valve Of Rocker Cover
    G07912516Courtesy of SUBARU OF AMERICA, INC.