Oil Flow Control Solenoid Valve: Inspection

WARNING: This page is about a different variant/trim than selected.

Check that the oil flow control solenoid valve has no deformation, cracks or other damages.
Measure the resistance between the oil flow control solenoid valve terminals.

Intake oil flow control solenoid valve

Fig 1: Measuring Resistance Between Intake Oil Flow Control Solenoid Valve Terminals
Courtesy of SUBARU OF AMERICA, INC.
Exhaust oil flow control solenoid valve

Fig 2: Measuring Resistance Between Exhaust Oil Flow Control Solenoid Valve Terminals
Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Standard
1 and 2	7.4±0.5 Ω (when 20°C (68°F))