LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4DOTC)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0365 Camshaft Position Sensor "B" Circuit (Bank 1) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

Judge as NG when the status where the number of camshaft position sensor signal in two engine revolutions is less than 2 time(s).

JUDGMENT VALUE CHART

Malfunction Criteria Threshold Value
Amount of camshaft sensor signal during 2 revs. < 2 time(s)

Time Needed for Diagnosis:  Engine two revolutions x 50

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the malfunction criteria below are met.

JUDGMENT VALUE CHART

Malfunction Criteria Threshold Value
Camshaft position sensor signal ≥ 2 time(s)

Time Needed for Diagnosis:  Two engine revolutions