Enable Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters |
Enable Conditions |
| Elapsed time after starting the engine |
≥ 40 s |
| Engine coolant temperature |
≥ 75 °C(167 °F) |
| Engine speed |
1200 RPM - 3250 RPM |
| Intake manifold pressure (absolute pressure) |
< 46.7 kPa (350 mmHg, 13.8 inHg) |
| Ambient air temperature |
≥ 5 °C(41 °F) |
| Throttle position |
< 0.25 ° |
| Battery voltage |
≥ 10.9 V |
| Atmospheric pressure |
≥ 75 kPa (563 mmHg, 22.2 inHg) |
| Vehicle speed |
≥53 km/h (32.9 MPH) |
| Fuel shut-off function |
In operation |
| Neutral switch |
OFF |
| After neutral switch ON/OFF change |
≥ Value from Map |
| No load change (A/C, power steering, lighting, rear defogger, heater fan and radiator fan) |
≥ 5000 ms |
MAP REFERENCE CHART
| Engine coolant temperature °C (°F) |
-40 (-40) |
-30 (-22) |
-20 (-4) |
-10 (14) |
0 (32) |
10 (50) |
20 (68) |
30 (86) |
| After neutral switch change msec |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
| Engine coolant temperature °C (°F) |
40 (104) |
50 (122) |
60 (140) |
70 (158) |
80 (176) |
90 (194) |
100 (212) |
110 (230) |
| After neutral switch change msec |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |