LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Forester X, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection System (Fuel Systems) (H4DOTC)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07670433Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the generator. < Ref. to REMOVAL , Generator. >
  4. Drain engine coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
  5. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 2: Identifying Engine Coolant Temperature Sensor Connector
    G07670434Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals