LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Tribeca Touring >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System - Exhaust (H6DO - 3.6L DOHC) >> Muffler >> Removal

Exhaust System - Exhaust (H6DO - 3.6L DOHC): Muffler: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Set the vehicle on a lift.
  2. Lift up the vehicle.
  3. Separate the muffler from rear exhaust pipe.
    • LH side
      Fig 1: Locating Rear Exhaust Pipe Nuts - LH Side
      G05018846Courtesy of SUBARU OF AMERICA, INC.
    • RH side
      Fig 2: Locating Rear Exhaust Pipe Bolts (RH Side)
      G05031382Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the front and rear cushion rubber, and then remove the muffler.
    CAUTION: Be careful not to drop the muffler during removal.
    • LH side
      Fig 3: Locating Cushion Rubber (LH)
      G05018855Courtesy of SUBARU OF AMERICA, INC.
    • RH side
      Fig 4: Locating Cushion Rubber (RH)
      G05018856Courtesy of SUBARU OF AMERICA, INC.