LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback i, Standard >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the Outback Limited, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.8B
Front1.0B
Rear1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed System.
Each Additional0.2B
One0.3B
Combination Procedure: CALIPER: Overhaul:
Each Additional0.3B
OneIncludes: Bleed Brakes.0.7B
Combination Procedure: CALIPER: Replace:
OneIncludes: Bleed Brakes.0.6B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Replace:
Each0.1B
Combination Procedure: WHEEL BEARING: Replace:
Front,Each0.4B
Rear,Each0.3B