Multi Display Terminal Arrangement

Fig 1: Identifying Multi Display Terminal Arrangement

Courtesy of SUBARU OF AMERICA, INC.

Connector

VOLTAGE SPECIFICATION

Terminal No.	Item	Measuring condition	Specification
5 (U-ART com.)	-	Cannot be measured	-
6 (GND) ←→ Chassis ground	Resistance	Always	Less than 1 Ω
8 (IG) ←→ Chassis ground	Voltage	IG OFF → ON	0 V → 10 - 14 V
10 (+B) ←→ Chassis ground	Voltage	Always	10 - 14 V