LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Intake System - Intake (Induction) (H4DOTC - 2.5L DOHC Turbo)) >> Intake Duct >> Disassembly

Intake Duct: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the vacuum hose (A) and vacuum hose (B) from intake duct.
    Fig 1: Identifying Vacuum Hose
    G06649145Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the wastegate control solenoid valve and air control hose from the intake duct.
    Fig 2: Locating Wastegate Control Solenoid Valve And Air Control Hose
    G06649146Courtesy of SUBARU OF AMERICA, INC.