Intake Duct: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the wastegate control solenoid valve and air control hose to the intake duct.
NOTE: Use new O-rings.

Tightening torque:

1 N.m (0.1 kgf-m, 0.7 ft-lb)

Fig 1: Locating Wastegate Control Solenoid Valve And Air Control Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the vacuum hose (A) and vacuum hose (B) from intake duct.

Fig 2: Identifying Vacuum Hose
Courtesy of SUBARU OF AMERICA, INC.