LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Intake System - Intake (Induction) (H4DOTC - 2.5L DOHC Turbo)) >> Air Intake Boot >> Assembly

Air Intake Boot: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the air intake boot to the turbo duct.

Tightening torque: 

2.5 N.m (0.3 kgf-m, 1.8 ft-lb) 

Fig 1: Locating Air Intake Boot And Turbo Duct
G06649127Courtesy of SUBARU OF AMERICA, INC.