Connecting The Fuel Line Quick Connector

WARNING: This page is about a different variant/trim than selected.

CAUTION: Make sure there are no damage or dust on connections. If necessary, clean seal surface of pipe.

Fig 1: Identifying Seal Surface And Pipe

G06651405

Courtesy of SUBARU OF AMERICA, INC.

Set the retainer to quick connector.
NOTE: Use a new retainer.
Connect the quick connector to pipe.
CAUTION:
- Make sure that the quick connector is securely connected.
  
  Fig 2: Checking Quick Connector
  Courtesy of SUBARU OF AMERICA, INC.
- Make sure the two retainer pawls are engaged in their mating positions in the quick connector.
- Be sure to inspect tubes and their connections for any leakage of fuel.
  
  Fig 3: Identifying Quick Connector, Retainer And Pipe
  Courtesy of SUBARU OF AMERICA, INC.