Tumble Generator Valve Assembly: Removal

WARNING: This page is about a different variant/trim than selected.

Release the fuel pressure. Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Identifying Ground Cable And Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Remove the intake manifold. Ref. to REMOVAL , Intake Manifold.
Disconnect the connector from the tumble generator valve assembly.

Fig 2: Identifying Tumble Generator Valve Assembly Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector. Ref. to REMOVAL , Fuel Injector.
Remove the tumble generator valve assembly from the intake manifold.

Fig 3: Locating Tumble Generator Valve Assembly From Intake Manifold And Bolts
Courtesy of SUBARU OF AMERICA, INC.