RH Side

WARNING: This page is about a different variant/trim than selected.

Release the fuel pressure. Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Identifying Ground Cable And Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Remove the intake manifold. Ref. to REMOVAL , Intake Manifold.
Remove the intake manifold protector RH from intake manifold.

Fig 2: Locating Bolts And Intake Manifold Protector RH
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the fuel injector and tumble generator valve assembly.

Fig 3: Locating Fuel Injector And Tumble Generator Valve Assembly Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which secures the fuel pipe to the intake manifold.

Fig 4: Locating Fuel Pipe To Intake Manifold Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector.

Fig 5: Removing Fuel Injector
Courtesy of SUBARU OF AMERICA, INC.