Fuel Filler Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.

Temporarily tighten the bolts securing the fuel filler pipe bracket to the fuel filler pipe.

Fig 1: Locating Fuel Filler Pipe Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the evaporation pipe to the fuel filler pipe.
Tightening torque: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 2: Locating Evaporation Pipe Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Tighten the bolts securing the fuel filler pipe bracket to the fuel filler pipe.
Tightening torque: 7.35 N.m (0.7 kgf-m, 5.4 ft-lb)

Fig 3: Locating Fuel Filler Pipe Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the shut valve to the fuel filler pipe. Ref. to INSTALLATION , Shut Valve.