Valve Seat

WARNING: This page is about a different variant/trim than selected.

Inspect the intake and exhaust valve seats, and correct the contact surfaces with a valve seat cutter if they are defective or when valve guides are replaced.

Contacting width of valve and valve seat W:

Standard

Intake

0.6 - 1.4 mm (0.024 - 0.055 in)

Exhaust

1.2 - 1.8 mm (0.047-0.071 in)

Fig 1: Checking Valve Seat Width

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Inspecting Intake And Exhaust Valve Seats

Courtesy of SUBARU OF AMERICA, INC.