LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (H4DOTC - 2.5L DOHC Turbo)) >> Crank Sprocket >> Removal

Crank Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing the single part, perform the work with the engine installed to vehicle body.
  1. Remove the crank pulley. Ref. to REMOVAL , Crank Pulley.
  2. Remove the timing belt cover. Ref. to REMOVAL , Timing Belt Cover.
  3. Remove the timing belt. Ref. to REMOVAL , Timing Belt.
  4. Remove the crank sprocket.
    Fig 1: Identifying Crank Sprocket
    G04997667Courtesy of SUBARU OF AMERICA, INC.