LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0301 Cylinder 1 Misfire Detected >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

When a misfire occurs, the engine speed will decreased and the crankshaft position speed will change. Calculate the interval difference value (diagnostic value) from crankshaft position speed by the following formula, and judge whether a misfire is occurring or not comparing the calculated result with judgment value. Counting the number of misfires. If the misfire ratio is higher during 1000 revs, or 200 revs. Judge corresponding cylinders as NG.

VALUE CALCULATION CHART

Diagnostic value calculation (Calculate from angle speed) → Misfire detection every single ignition (Compare diagnostic value with judgment value) → NG judgment (Misfire occurrence judgment required by the law) (Compare number of misfire with judgment)
 
  • 120° Interval Difference Method
  • 360° Interval Difference Method
  • 720° Interval Difference Method
  • FTP 1.5 times misfire NG judgment
  • Catalyst damage misfire NG judgment

As shown in the following figure, pick a cylinder as the standard and name it omg 0. And the former crankshaft position speed is named omg 1, the second former crankshaft position speed is named omg 2, the third is named omg 3, etc.

Fig 1: Identifying Ignition Order Number And Crankshaft Position Speed
G06651633Courtesy of SUBARU OF AMERICA, INC.

120° Interval Difference Method 

VALUE REFERENCE

Diagnostic value domg 120 = (omg 1 - omg 0) - (omg 7 - omg 1)/6
Judge as a misfire in the following cases.
  • domg 120 > judgment value of positive side
  • domg 121 ≤ judgment value of negative side

(Judgment value before 120° CA)
Fig 2: 120° Interval Difference Method
G05019175Courtesy of SUBARU OF AMERICA, INC.

360° Interval Difference Method 

VALUE REFERENCE

Diagnostic value domg 360 = (omg 1 - omg 0) - (omg 4 - omg 3)
Misfire judgment domg 360 > Judgment value → Judge as misfire
Fig 3: 360° Interval Difference Method misfire Judgment Graph
G04998183Courtesy of SUBARU OF AMERICA, INC.

720° Interval Difference Method 

VALUE REFERENCE

Diagnostic value domg 720 = (omg 1 - omg 0) - (omg 7 - omg 6)
Misfire judgment domg 720 > Judgment value → Judge as misfire
Fig 4: 720° Interval Difference Method misfire Judgment Graph
G04998184Courtesy of SUBARU OF AMERICA, INC.

Judgment Value (Judge that malfunction occurs when the misfire ratio is high in 1000 engine revs.) 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
FTP emission judgment value ≥ 40 x 100/3000% in 1000 revs.

Time Needed for Diagnosis:  1000 engine revs.

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.

Judgment Value 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
FTP emission judgment value <40 x 100/3000% in 1000 revs.

Time Needed for Diagnosis:  1000 engine revs.

Judgment Value 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Catalyst damage misfire judgment value ≥ Value of Map 3

Map 3 

AIR PRESSURE SPECIFICATION

  Intake air (g(oz)/rev)
0.2 (0.01) 0.4 (0.01) 0.6 (0.02) 0.8 (0.03) 1 (0.04) 1.2 (0.04) 1.4 (0.05) 1.6 (0.06) 1.8 (0.06) 2 (0.07)
Engine speed (RPM) 700 90 90 88 76 68 68 68 68 68 68
1000 90 90 88 76 68 68 68 68 68 68
1500 89 88 80 64 56 56 56 56 56 56
2000 88 84 64 40 36 35 35 35 35 35
2500 88 80 56 36 30 30 30 30 30 30
3000 64 56 30 30 30 30 30 30 30 30
3500 50 40 30 30 30 30 30 30 30 30
4000 40 38 30 30 30 30 30 30 30 30
4500 50 30 30 30 30 30 30 30 30 30
5000 40 30 30 30 30 30 30 30 30 30
5500 40 30 30 30 30 30 30 30 30 30
6000 36 36 30 30 30 30 30 30 30 30
6500 32 32 30 30 30 30 30 30 30 30
7000 32 32 30 30 30 30 30 30 30 30

Time Needed for Diagnosis:  200 engine revs.

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judgment Value 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Catalyst damage misfire judgment value < Value of Map 2

Time Needed for Diagnosis:  200 engine revs.