Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | ≥ 75°C(167°F) |
| Engine load change | ≤ 0.02 g/rev (0 oz/rev) |
| Learning value of EVAP cone. | <0.1 |
| Cumulative time of canister purge after engine start | ≥ 20s |
| Continuous period after canister purge starting | ≥ 29884 ms |
| Engine load | ≥ Value of Map 1 |
Map 1
AIR PRESSURE SPECIFICATION
| Engine speed (RPM) | Idling | 700 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 |
| Measured value (g (oz)/rev) | na | 0.357 (0.01) | 0.25 (0.01) | 0.25 (0.01) | 0.317 (0.01) | 0.326 (0.01) | 0.337 (0.01) | 0.397 (0.01) | 0.439 (0.02) | 0.454 (0.02) | 0.454 (0.02) |