LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Emission Control Systems (Aux. Emission Control Devices) (H6DO - 3.6L DOHC)) >> Drain Valve >> Inspection

Drain Valve: Inspection

WARNING: This page is about a different variant/trim than selected.

Measure the resistance between drain valve terminals.

Fig 1: Measuring Resistance Between Drain Valve Terminals
G06344918Courtesy of SUBARU OF AMERICA, INC.
TERMINAL SPECIFICATIONS

Terminal No. Standard
1 and 2 20 - 30 Ω
scientia non olet · About LEMON Manuals