Purge Control Solenoid Valve 2

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Connect the evaporation hose as shown in the figure.

Fig 1: Identifying Purge Control Solenoid Valve

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 2: Locating Purge Control Solenoid Valve And Solenoid Valve Bracket Assembly

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating PCV Pipe And Engine Harness

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Identifying Solenoid Valve Bracket Assembly

Courtesy of SUBARU OF AMERICA, INC.