DTC P0463 Fuel Level Sensor "A" Circuit High: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
- Detected when two consecutive driving cycles with fault occur.
- GENERAL DESCRIPTION Ref. to DTC P0463 FUEL LEVEL SENSOR "A" CIRCUIT HIGH , Diagnostic Trouble Code (DTC) Detecting Criteria.
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to
OPERATION , Clear Memory Mode, and Inspection Mode Ref. to
PROCEDURE , Inspection Mode.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is DTC P0462 or P0463 displayed on the Subaru Select Monitor? | Check the combination meter. Ref. to INSPECTION , Combination Meter System. | Even if DTC is detected, the circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.
NOTE:
In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.
|