LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Controls - Engine (Diagnostics) (H6DO - 3.6L DOHC)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0451 Evaporative Emission Control System Pressure Sensor >> DTC Detecting Condition

DTC P0451 Evaporative Emission Control System Pressure Sensor: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to OPERATION , Clear Memory Mode, and Inspection Mode Ref. to PROCEDURE , Inspection Mode.
DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK FUEL FILLER CAP. 
  1. Turn the ignition switch to OFF.
  2. Open the fuel flap.
Is the fuel filler cap tightened securely? Go to step 2.  Tighten fuel filler cap securely.
2 CHECK PRESSURE VACUUM LINE. 
NOTE: Check the following items.
  • Disconnection, leakage and clogging of the vacuum hoses and pipes between fuel tank pressure sensor and fuel tank
  • Disconnection, leakage and clogging of air ventilation hoses and pipes between fuel filler pipe and fuel tank
Is there any fault in pressure/vacuum line? Repair or replace the hoses and pipes. Replace the fuel tank pressure sensor. Ref. to FUEL TANK PRESSURE SENSOR .