LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Controls - Engine (Diagnostics) (H4DOTC - 2.5L DOHC Turbo)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0244 Turbo/Super Charger WASTEGATE Solenoid "A" Range/Performance >> Wiring Diagram

DTC P0244 Turbo/Super Charger WASTEGATE Solenoid "A" Range/Performance: Wiring Diagram

WARNING: This page is about a different variant/trim than selected.
Fig 1: Turbo/Super Charger Wastegate Solenoid - Wiring Diagram
G06647788Courtesy of SUBARU OF AMERICA, INC.
DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK FOR ANY OTHER DTC ON DISPLAY  . Is any other DTC displayed? Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . Go to step .
2 CHECK WASTEGATE ACTUATOR PIPING AND WASTEGATE CONTROL SOLENOID VALVE PIPING  . Are there any damage or disconnection of hose in waste-gate actuator piping or wastegate control solenoid valve piping? Connect the wastegate actuator pipe or wastegate control solenoid valve pipe properly. If defective, replace the hose. Replace the waste-gate control solenoid valve. Ref. to WASTEGATE CONTROL SOLENOID VALVE .