Front Exhaust Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the exhaust pipe stay to the front exhaust pipe.
Tightening torque:

33 N.m (3.4 kgf-m, 24.3 ft-lb)

Fig 1: Locating Exhaust Pipe Stay
Courtesy of SUBARU OF AMERICA, INC.
Install the turbocharger to the front exhaust pipe.
NOTE: Use a new gasket and self-locking nut.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)

Fig 2: Locating Turbocharger
Courtesy of SUBARU OF AMERICA, INC.
Install the center exhaust pipe (front) to the turbocharger together with turbocharger upper stay (A) and turbocharger lower stay (B).
NOTE: Use a new gasket and self-locking nut.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)

Fig 3: Locating Turbocharger Upper Stay And Turbocharger Lower Stay
Courtesy of SUBARU OF AMERICA, INC.
Install the exhaust pipe cover.
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 4: Locating Exhaust Pipe Cover
Courtesy of SUBARU OF AMERICA, INC.