CVTF Cooler Pipe and Hose: Inspection

Repair or replace any faulty hoses, pipes, clamps, and washers found in the inspection below.

• Check for CVTF leaks in joints between the transmission, radiator, CVTF oil cooler (OUTBACK model), pipes, and hoses.
• Check the clamp for deformation.
• Lightly bend the hose and check for cracks in the surface or other damages.
• Pinch the hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail.
• Check for peeling, cracks, and deformation at the tip of the hose.