Section 11 (Engine Cooling System - Cooling (H6DO - 3.6L DOHC)): Thermostat: Installation

WARNING: This page is about a different variant/trim than selected.

Install a gasket to thermostat.
NOTE: Use a new gasket.
Install the thermostat and thermostat cover.
NOTE: Install the parts with the jiggle pin facing the upside.

Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 1: Locating Thermostat Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the radiator lower hose to the radiator lower and the thermostat cover.

Fig 2: Identifying Radiator Lower Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the under cover. Ref. to INSTALLATION , Front Under Cover.
Lower the vehicle.
Fill engine coolant. Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.