LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Cooling System - Cooling (H4DOTC - 2.5L DOHC Turbo)) >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Remove the radiator. Ref. to REMOVAL , Radiator.
  3. Remove the V-belts. Ref. to REMOVAL , V-belt.
  4. Remove the crank pulley. Ref. to REMOVAL , Crank Pulley.
  5. Remove the timing belt cover. Ref. to REMOVAL , Timing Belt Cover.
  6. Remove the timing belt. Ref. to REMOVAL , Timing Belt.
  7. Remove the automatic belt tension adjuster (A).
  8. Remove the belt idler (B).
  9. Remove the belt idler No. 2 (C).
    Fig 1: Removing Belt Idler
    G04998861Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the cam sprocket LH. Ref. to REMOVAL , Cam Sprocket.
  11. Remove the belt cover No. 2 LH.
    Fig 2: Locating Belt Cover No. 2
    G06649597Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the tensioner bracket.
    Fig 3: Identifying Tensioner Bracket
    G04998863Courtesy of SUBARU OF AMERICA, INC.
  13. Disconnect the hose from water pump.
  14. Remove the water pump.
    Fig 4: Locating Water Pump Bolts
    G06649599Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals