Oil Pressure Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket: THREE BOND 1324 (Part No. 004403042) or equivalent

Fig 1: Applying Liquid Gasket To Oil Pressure Switch Threads
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch.
Tightening torque: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal of the oil pressure switch.

Fig 3: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Install the under cover. Ref. to INSTALLATION , Front Under Cover.
Refill the engine oil. Ref. to REPLACEMENT , Engine Oil.
Check the engine oil level. Ref. to INSPECTION , Engine Oil.