LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) (H4SO - 2.5L SOHC) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

  1. Remove the cover (A) and clip (B) from air intake boot assembly.
    Fig 1: Identifying Cover And Clip
    G06648482Courtesy of SUBARU OF AMERICA, INC.
  2. Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case.
  3. Loosen the clamp (B) which connects the air intake boot assembly and throttle body.
    Fig 2: Identifying Air Intake Boot Assembly And Air Cleaner Case
    G06648483Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the blow-by hose and remove the air intake boot assembly.
scientia non olet · About LEMON Manuals