Rear Seat: Installation
Install each part in the reverse order of removal.
CAUTION:
If the hook is removed from vehicle body, replace the hook with the new part to avoid the deterioration of seat securing.
NOTE:
- After installing the backrest, make sure that each seat belt operates normally.
- Check that the remote lever and reclining lever operate normally.
- Make sure that they are properly secured on each hook on the vehicle side.
Tightening torque:
Refer to "COMPONENT" of "General Description".
Sedan model: Ref. to REAR SEAT (SEDAN MODEL) , COMPONENT, General Description. OUTBACK model Ref. to REAR SEAT (OUTBACK MODEL) , COMPONENT, General Description.